lumecoco
어드벤처 렐름 - 3D 미니어처 스티커 씬
어드벤처 렐름 - 3D 미니어처 스티커 씬
픽업 사용 가능 여부를 로드할 수 없습니다.
❤️튼튼하고 안전한 소재: 이 귀여운 스티커는 품질 좋은 종이로 만들어졌으며 신뢰할 수 있고 무독성이며 무취입니다. 고화질 기술로 인쇄된 3D 스티커는 아름다운 입체 효과를 연출합니다.
🎁모든 주문에는 정밀한 배치를 위한 무료 핀셋 한 쌍과 특별한 선물이 포함되어 있습니다.
Where to start
Refer to the reference picture. Usually start pasting from the innermost and bottom area, then work your way out gradually.
As shown in the picture: Begin with the innermost cabinet, then apply items on the shelves and clips above it. Next, attach the photos and windows on the other side. Follow the order from far to near and from inside to outside.
In most cases, start from the central intersection point. Always stick down obscured items first.
Use a helper sheet
For large stickers that are hard to align, use a helper sheet.
1. As shown in the picture: Attach most of the sticker to the front of the helper sheet, leaving one corner exposed.
2. Move it to the background board, adjust and align the position.
3. Once fixed, remove the helper sheet.
Tips: How to take off stickers easily
1. Peel off the top film layer
Use your tweezers to lift and peel off the excess material from the edge. Work slowly to avoid tearing the sticker. If a small sticker is lifted accidentally, gently press it back with your fingers or tweezers.
2. Choose pointed tweezers.
It’s much easier to grab stickers with them. Take care not to hurt your fingers when using them。